Site Map
- HOME
- About LMATS
- Client Assistant
- Services
- Mechanical Testing
- Spectroscopy
- Chemical Testing
- Corrosion Testing
- Weld Qualification
- Metallurgical Services
- Failure Analysis / Investigation
- Material Identification
- Macroscopic Examination
- Metallography
- Micro constituents counting
- Etch structure classification
- Case depth determination
- Graphite classification test
- Microscopic thickness measurement
- Grain size measurement
- Inclusion contents test
- Ferrite Measurement
- Hydrostatic Test
- Engineering structures test
- Engineering Inspections
- Non Destructive Testing
- Visual Inspection (VT)
- Radiographic test (RT)
- Ultrasonic test (UT)
- Eddy Current Test (ET)
- Alternating Current Field Measurement (ACFM)
- Direct Current Potential Drop (DCPD)
- Magnetic Particle Test (MT)
- Dye Penetrant Test (PT / DPI / LPI )
- Ferrite Measurement
- Leak Testing (LT)
- Heat exchanger tube leakage test
- Vacuum box test
- Hardness Testing
- Material Identification
- Contamination Testing
- Concrete Slab Inspection
- Anchors Load Testing
- Phased Array Ultrasonic testing (PAUT)
- Time of Flight Diffraction (TOFD)
- Internal Rotary Inspection system (IRIS)
- Protective Coatings test
- Calibration Services
- Professional Services
- Tests on Concrete & Refractory material
- Concrete Thickness measurement
- Concrete Slab Inspection
- Anchor testing
- Concrete Cover measurement
- Concrete hardness/strength
- Concrete Reinforcing bars
- Concrete adhesion (pull-off) test
- Compressive strength
- Bulk Density
- Apparent Porosity
- Modulus of rupture
- Abradability Index
- Permanent linear change
- Thermal Conductivity
- Hand Tools Testing
- Abrasive Testing
- Miscellaneous Services
- ILAC MRA ISO 17025 Testing Services
- Contact Us
- Resource Centre
- Mechanical Testing
- Chemical Testing
- Weld Qualification Testing
- Metallurgical Testing
- Hydrostatic Testing
- Pressure Equipment Inspections
- NDT Non-Destructive Testing
- NDT - vacuum Box (Bubble) Test
- NDT - Penetrant Examination/Test (DPI,LPI,FDPI,PT)
- NDT - Magnetic Particle Test (MPI/FMPI/MT)
- NDT - Alternating Current Field Measurement Testing
- NDT - Eddy Current Test (ET)
- NDT - Internal Rotary Inspection system (IRIS)
- NDT - Time of Flight Diffraction (TOFD)
- NDT - Phased Array Ultrasonic testing (PAUT)
- NDT - Ultrasonic testing (UT/UFD/ULT/UTT)
- Crane Inspections
- NDT - Radiographic Testing (RT)
- NDT - Visual Inspection (VT)
- NDT - Ferrite Measurement (In-Situ)
- NDT FAQ'S
- Is there any alternative to Radiography to detect reo bars in the concrete?
- Can a butt weld procedure qualify fillet weld as per AS 3992?
- What is the frequency of pressure vessel inspection?
- Is overseas ILAC accreditation to ISO 17020 same as NATA accreditation to ISO 17025?
- I have a NATA endorsed metals chemical analysis report issued by a mechanical testing laboratory who did not perform the chemical analysis. Is this report legitimate?
- What is the holding time for hydrostatic test as per ASME B31.3
- My products are manufactured overseas. They are tested by an overseas ILAC accredited NDT company is this the same as a NATA Certificate?
- Can I get a NATA endorsed test report for Equotip hardness test?
- Can I get a NATA endorsed test report for Poldi hardness test?
- Can I get a NATA endorsed test report for Leeb hardness test?
- I am told radiographic and ultrasonic won’t work on large fillet welds
- Standards interpretation
- Careers
- Site Map
Melbourne Victoria NDT & Mechanical Testing Services
Melbourne Head Office
6 Techno Park Drive
Williamstown,Victoria 3016
Phone +61 3 9399 8145
&
Dandenong Workshop
63 Mark Anthony Drive
Dandenong, VIC 3175
Chemical Analysis & PMI
Third party Inspection
Non Destructive Testing NDT
Mechanical Testing Services
Sydney NSW NDT & Mechanical Testing Services
Sydney NSW
1C / 137 Silverwater Road,
Silverwater, NSW 2128
Phone 02 9648 1989
Third Party Inspection
PMI & Metals analyis
Non Destructive Testing NDT
Mechanical Testing NDT Sydney
Pressure vessel Inspection
